Connecting to an Astera Server using Lean Client
PreviousConnecting to a Different Astera Server from the Lean ClientNextHow to Build a Cluster Database and Create a Repository
Last updated
Last updated
© Copyright 2023, Astera Software
After you have successfully installed the Astera client and server applications, open the client application and you will see the Server Connection screen as pictured below.
Enter the Server URI and Port Number to establish the connection.
The server URI will be the IP address of the machine where the Astera Integration server is installed.
Server URI: (HTTPS://IP_address)
Note: You can get the help of your network administrator to get the IP address of the machine where the Astera Integration server is installed. Or you can launch the command prompt and type the command ipconfig to get the IP configuration details for the machine and use that information to provide the Server URI.
The default port for the secure connection between the Lean client and Astera Integration server is 9260.
If you have connected to any server recently, you can automatically connect to that server by selecting that server from the Recently Used drop-down list.
Click Connect after you have filled out the information required.
The client will now connect to the selected server. You should be able to see the server listed in the Server Explorer tree when the client application opens.
To open Server Explorer go to Server > Server Explorer or use the keyboard shortcut Ctrl + Alt + E.
The yellow icon with an exclamation mark means that the server is not configured. Before you can start working with the Astera Lean client, you will have to create a repository and configure the server.
